Onyx For Mac 10.6 8
- OnyX versions are specific to each version of macOS and are not backward compatible. The program will not work correctly if used with an OS for which it was not designed. Mac OS X 10.2 Jaguar: OnyX version 1.3.1.
- Onyx Mac Download. Developer: Titanium’s Software. OnyX mac is an all-in-one system maintenance tool and optimizer. It is a very simple and light application that comes with a variety of maintenance tools that can be run to make sure that you are enjoying your system at its fullest.
- Make sure you download the correct version of Onyx matching to your OS X) Open Onyx. In Onyx, click on Maintenance tab. Select Rebuild tab, check all boxes and then Execute. The under Cleaning select System and User and check all boxes on both and Execute. Then restart your Mac.
Mac OSX 10.6.2: also problems with onyx, was working perfect on leopard, but a lot of problems with snow leopard. Always losing the signal. Maybe downgrade better? Andy on 2010-01-14 at 18:21 said: For all of you looking for SDK 24! OnyX is compatible on versions of OS X 10.2 and later, but you need the right version of OnyX on your Mac, otherwise it won’t work: Download OnyX 2.9.6 for Mac OS X 10.10 Yosemite Download OnyX 2.8.8 for Mac OS X 10.9 Mavericks Download OnyX 2.7.4 for Mac OS X 10.8 Mountain Lion.
Onyx Driver Compatibility
If you need to quickly see which driver you need to install on your system for your mixer or interface, you can cross reference it with your operating system using this chart.
| XP | XP Service Pack 2 | XP Service Pack 3 | Vista | Vista Service Pack 2 | Windows 7 | Windows 8 | Mac OS 10.5 - 10.6.7 | Mac OS 10.6.8 - 10.8 | |
|---|---|---|---|---|---|---|---|---|---|
| Onyx-i Serials Beginning with 204 | Not Supported | Not Supported | PC v4.1 | PC v4.1 | PC v4.1 | PC v4.1 | PC v4.1 | Not Supported | Mac v4.1 |
| Onyx-i Serials Beginning with 003 | Not Supported | PC v1.7 | PC v1.9 | PC v1.7 | PC v1.9 | PC v1.7 | Not Supported | Mac Core Audio | Mac Core Audio |
| Onyx FireWire Option Card | v1.1.1 | PC v1.7 | PC v1.7 | PC v1.7 | PC v1.7 | PC v1.7 | Not Supported | Mac Core Audio | Mac Core Audio |
| Onyx Blackbird | PC v4.1 | PC v4.1 | PC v4.1 | PC v4.1 | PC v4.1 | PCv4.1 | PC v4.1 | Mac v3.5.2 | Mac v4.1 |
| Onyx Blackjack | Not Supported | USB PC v3 | USB PC v3 | USB PC v3 | USB PC v3 | USB PC v3 | Not Supported | Mac Core Audio | Mac v4.1 |
| Onyx Satellite | Not Supported | PC v1.7 | PC v1.7 | PC v1.7 | PC v1.7 | PC v1.7 | Not Supported | Mac Core Audio | Mac Core Audio |
*PC Driver v1.9 and Mac OS Core Audio for Onyx-i mixers do not support device aggregation. This means you cannot connect multiple Onyx-i devices to the same computer for simultanous use. Similarily, you cannot aggregate Onyx-i mixers with Onyx Blackbirds.
*Drive v4.1.0 + Control Panel v1.0.0 do support device aggregation on PC and Mac with other Onyx-i mixers, as well as Onyx Blackbirds (up to four devices). Note that if you are connecting an Onyx-i mixer to a PC or Mac by itself, the above PC or Mac driver is the appropriate driver for that setup. However, if you are planning to aggregate the Onyx-i mixer with an Onyx Blackbird, you will need the latest driver and control panel for the Onyx Blackbird which installs the Onyx Blackbird control panel and allows you to aggregate it with other Onyx-i mixers starting with the serial number 204.
Questions? Contact us.
If you’re looking for an easy to use application that will help declutter your Mac’s hard drive and freshen up system files that need a little tlc, look no further than OnyX.
OnyX is a multifunction utility for Mac OS that allows you to maintain your Mac, refresh system files and access/modify hidden settings in Mac OS X.
In this guide we will focus strictly on OnyX’s feature that allows you to clean out files that clutter your Mac’s hard drive and can reduce your machine’s performance.
Before you begin I suggest you read through this guide first and then download OnyX (download link at end of guide) to follow the instructions below.
Launching OnyX for the First Time
When you launch OnyX for the first time you will be prompted to accept the license agreement. Click OK to accept so that you can use the application.
1. You will then be asked to check the drive’s S.M.A.R.T. Status. Click Continue to check the status of your hard drive.
Note: If you checked the drive’s S.M.A.R.T. status recently you can skip the check by clicking Cancel.
2. You will also be asked to verify the startup volume. This step is recommended before performing Cleaning and Maintenance tasks with Onyx.
Click Continue to verify the startup volume. Click OK when the results prompt appears.
In order to perform any task in OnyX you will need to first enter your Administrator password when prompted.
Cleaning Your Mac with OnyX
Once you’ve ensured your hard drive’s good it’s time to actually start using OnyX.
Warning: Please backup your Mac before proceeding with any system changes using OnyX.
In the following steps we will be focusing on cleaning up cache files and other non-essential files on your Mac, so you will be spending all of your time on the Cleaning button.
Note: When you delete system cache files you will notice that your Mac may run a bit slower at first. This is normal and has to do with the building of fresh caches.
1. Click the Cleaning icon to open the set of options available.
2. Add a checkmark to each of the cache items you wish to delete.
3. When you are ready to clear the cache, click the Execute button.
When you click Execute a prompt will appear notifying you that all open applications will be closed. Click Continue to proceed.
Onyx For Mac 10.6.8
After you click Continue you will be prompted to shut down or reboot your Mac.
Personally I prefer to reboot the computer for each set of items I clean out, but you can click the Close button and execute another set of commands before rebooting your Mac.
4. If you decided to continue to clear items before rebooting simply click on the User tab and repeat the steps above.
5. Add a check mark to the items you wish to clear from the list.
6. Click Execute to delete the selected items.
Once the process is complete you will be prompted to reboot your computer once again.
You can repeat this process with the remaining tabs: Internet, Fonts, Logs and Misc.
Each time you execute the clean commands, OnyX will clean up the selected items and then prompt you when the process is complete.
Onyx Mac 10.6 8
If you waited to the end to reboot your Mac between each of the clean-ups, you should reboot your Mac as recommended.
Onyx Mac Snow Leopard 10.6 8
If you have any comments or questions please use the comments form below.
OnyX Download Links
- Onyx for Mac OS X Snow Leopard download.
- Onyx for Mac OS X Lion (Beta as of publish date) download.
Software/Hardware used: Mac OS X 10.6.8.